Category: Lighting & Studio > Reflectors & Accessories

Email A Friend      Print This Page

Click to enlarge

Honeycomb Grids

White Lightning

The Honeycomb Grids come in four angles of beam width: 10º, 20º, 30º and 40º. The Mainframe can be used for grid attachment, as the grids can recess directly into the frame, and may then be used with other LiteMod accessories. With the X-Series units, the Mainframe is not required as our honeycomb grids will snap directly into the outer lip of the 7AB/R 7-inch reflector as well.

the HG10° - 80° beam spread down to 10°
the HG20° - 80° beam spread down to 20°
the HG30° - 80° beam spread down to 30°
the HG40° - 80° beam spread down to 40°


HG10
10º Grid HG20
20º Grid HG30
30º Grid HG40
40º Grid
at 1 foot 6 inches 12 inches 18 inches 24 inches
at 5 feet 12 inches 24 inches 36 inches 48 inches
at 10 feet 24 inches
(2 feet) 48 inches
(4 feet) 72 inches
(6 feet) 96 inches
(8 feet)


Note: The 7-inch reflector that is designed with the recessed outer lip has only been offered on the White Lightning X-Series units purchased since August of 2003, and on the UltraZAP Series Units purchased since February 2005. If you have an X-Series unit purchased before then, or if you have one of the previously offered White Lightning Ultra Series or ZAP Flash Units, the standard reflector that came with that unit did not have the modified outer lip for directly recessing the honeycomb grids. You will need to use the UMF Mainframe to hold the honeycomb grids. If you have one of the previously offered White Lightning WL 5,000 or WL 10,000 Flash Units, you can use the GS1 Grid Spot Attachment

Average Rating: Rate it:  Poor Excellent Add to Favorites

For more information on this product, visit White Lightning's website.